Christ University Institutional Repository

Items where Subject is "Publications > Publications by Faculty > Articles > Engineering"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | H | M | P
Number of items at this level: 15.

P, Pal Pandian and Sakthimurugan, K. and Raja, V.Prabhu (2010) Optimization of Cutting Parameters in High Speed Machining of Thin Ribs. Proceedings of International Conference on Advances in Industrial Engineering Applications . p. 6.

H

Hebbar, Gurumoorthy S and Bhat, Anant Krishna (2009) Analysis of Performance and Emissions of a Naturally Aspirated Stationary DI Diesel Engine with Exhaust Gas Recirculation. International Journal of Applied Engineering Research, 4 (11). pp. 2115-2124. ISSN 0973-4562

M

M.C, Prahallada and B. C, Shanthappa and K. B, Prakash (2011) EFFECT OF ADDITION OF COMBINATION OF ADMIXTURES ON THE PROPERTIES OF SELF COMPACTING CONCRETESUBJECTED TO ALTERNATE WETTING AND DRYING. International Journal of Civil Engineering and Technolgy, 2 (1). pp. 17-24. ISSN 0976-6308

M.C, Prahallada and B.C, Shanthappa (2011) Effect of Addition of Combination of Admixtures on. International Journal of Civil Engineering Research., 2 (2). pp. 273-282. ISSN 0973-1873

M.C, Prahallada and K.B, Prakash (2011) Strength and Workability Characteristics of Waste Plastic Fibre Reinforced Concrete Produced From Recycled Aggregates. International Journal of Engineering Research and, 1 (4). pp. 1791-1802. ISSN 2248-9622

M.C, Prahallada and K.B, Prakash (2012) Behaviour of RCC Beams with Waste Plastic Fibres-. International Journal of Civil Engineering Research., 3 (1). pp. 15-30. ISSN 0973-1873

M.C, Prahallada and K.B, Prakash (2011) Effect of replacement of Cement by Microsilica 600. INTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING, 2 . pp. 222-232. ISSN 0976 4399

M.C, Prahallada and K.B, Prakash. and B.C., Shanthappa (2011) EFFECT OF REDMUD ON THE PROPERTIES OF WASTE PLASTIC FIBRE REINFORCED CONCRETE AN EXPERIMENTAL INVESTIGATION. International Journal of Civil Engineering, 2 (1). pp. 25-34. ISSN 0976 6308

M.C, Prahallada and Prakash, K.B (2011) BEHAVIOUR OF WASTE PLASTIC FIBRE REINFORCED CONCRETE PRODUCED BY CONVENTIONAL AGGREGATES AND RECYCLED AGGREGATES UNDER ACIDIC ENVIRONMENT-AN EXPERIMENTAL INVESTIGATION. Global J. of Engg. & Appl. Sciences,, 1(4) (1(4)). pp. 71-74. ISSN 2249-2631

P

P, Pal Pandian (2007) OPTIMIZATION OF LOOP LAYOUT DESIGN PROBLEM IN FMS USING PARTICLE SWARM OPTIMIZATION TECHNIQUE. Proceedings of the International Conference on Modeling and Simulation (CITICOM 2007) Coimbatore Institute of Technology,Coimbatore, 27 29 August 2007 . p. 9.

P, Pal Pandian and Aravindan, S. and Thiruvalluvar, M. and Asokan, P. (2006) APPLICATION OF ANT COLONY OPTIMIZATION FOR EFFECTIVE SCHEDULING OF CLH PROCESSES IN BHEL. Proceedings of the International Conference on Modeling and Simulation 2006 3 5 April 2006, Kuala Lumpur, Malaysia . p. 6.

P, Pal Pandian and p, Pal Pandian (2008) OPTIMIZATION OF THE MACHINING PARAMETER OF LM6 ALUMINIUM ALLOY IN CNC TURNING USING NEURAL NETWORK. Proceedings of the International Conference on Frontiers in Design and Manufacturing Engineering (ICDM-08) Coimbatore, India, February 01-02, 2008 . p. 6.

P, Pal Pandian and Pushparaj, T. (2005) Solar Collector Using Waste Flurescent Tube with Digital Fault Detector and Heat Transfer Simulation Through Software. Proceedings of the National Conference on Latest Trends in Mechanical Engineering, April 1-2 2005 . p. 8.

P, Pal Pandian and Sakthimurugan, K. and Raja, V.Prabhu (2010) Identification of stability lobes in high-speed machining of thin ribs. Proceedings of the National Conference on Emerging Trends in Mechanical Engineering . p. 5.

P, Pal Pandian and Sakthimurugan, K. and Raja, V.Prabhu (2010) Surface Error Compensation in High Speed Machining of Thin Ribs. Proceedings of International Conference on Recent Advances in Mechanical Engineering . p. 8.

This list was generated on Fri Sep 22 19:01:11 2017 IST.